ICD-9 Code 715.27

Osteoarthrosis, localized, secondary, ankle and foot

Not Valid for Submission

715.27 is a legacy non-billable code used to specify a medical diagnosis of osteoarthrosis, localized, secondary, ankle and foot. This code was replaced on September 30, 2015 by its ICD-10 equivalent.

ICD-9: 715.27
Short Description:Loc 2nd osteoarthr-ankle
Long Description:Osteoarthrosis, localized, secondary, ankle and foot

Convert 715.27 to ICD-10

The following crosswalk between ICD-9 to ICD-10 is based based on the General Equivalence Mappings (GEMS) information:

  • M19.279 - Secondary osteoarthritis, unspecified ankle and foot

Code Classification

  • Diseases of the musculoskeletal system and connective tissue (710–739)
    • Arthropathies and related disorders (710-719)
      • 715 Osteoarthrosis and allied disorders

Information for Medical Professionals

Index to Diseases and Injuries

References found for the code 715.27 in the Index of Diseases and Injuries:


Information for Patients


Ankle Injuries and Disorders

Your ankle bone and the ends of your two lower leg bones make up the ankle joint. Your ligaments, which connect bones to one another, stabilize and support it. Your muscles and tendons move it.

The most common ankle problems are sprains and fractures (broken bones). A sprain is an injury to the ligaments. It may take a few weeks to many months to heal completely. A fracture is a break in a bone. You can also injure other parts of the ankle such as tendons, which join muscles to bone, and cartilage, which cushions your joints. Ankle sprains and fractures are common sports injuries.


[Read More]

Foot Injuries and Disorders

Each of your feet has 26 bones, 33 joints, and more than 100 tendons, muscles, and ligaments. No wonder a lot of things can go wrong. Here are a few common problems:

  • Bunions - hard, painful bumps on the big toe joint
  • Corns and calluses - thickened skin from friction or pressure
  • Plantar warts - warts on the soles of your feet
  • Fallen arches - also called flat feet

Ill-fitting shoes often cause these problems. Aging and being overweight also increase your chances of having foot problems.


[Read More]

Osteoarthritis

What is osteoarthritis?

Osteoarthritis, sometimes called OA, is a type of arthritis that only affects the joints, usually in the hands, knees, hips, neck, and lower back. It's the most common type of arthritis.

In a healthy joint, the ends of the bones are covered with a smooth, slippery tissue called cartilage. The cartilage pads the bones and helps them glide easily when you move the joint. With osteoarthritis, the cartilage breaks down and becomes rough. Sometimes, all the cartilage wears away and the bones rub together. Bumps of extra bone called bone spurs may grow in the joint area.

There is no cure for osteoarthritis. It usually gets worse slowly. But there's a lot you can do to manage the symptoms.

What are the symptoms of osteoarthritis?

Osteoarthritis affects people in different ways, and not everyone has pain. The most common symptoms are:

  • Pain when you move, which often gets better with rest
  • Stiffness, especially for the first 30 minutes after you get up from resting
  • Swollen joints, especially after using the joint a lot
  • Less movement in the joint than normal
  • A joint that feels loose or unstable

What causes osteoarthritis?

Researchers aren't sure what causes osteoarthritis. They think that it could be caused by a combination of factors in the body and the environment. Your chance of developing osteoarthritis increases with age. They also know that some people are more likely to develop it than others.

Who is more likely to develop osteoarthritis?

Things that make you more likely to develop osteoarthritis include:

  • Aging. Osteoarthritis can happen at any age, but the chance of getting it increases in middle-aged adults and older. After age 50, it is more common in women than in men.
  • Being overweight. Extra weight puts more stress on your joints.
  • Having a past injury or surgery on a joint. This is often the cause of osteoarthritis in younger adults.
  • Doing a lot of activities that overuse the joint. This includes sports with a lot of jumping, twisting, running, or throwing.
  • Having a joint that doesn't line up correctly.
  • A family history of osteoarthritis. Some people inherit genetic changes that increase their chance of developing osteoarthritis.

How is osteoarthritis diagnosed?

There is no specific test for osteoarthritis. To find out if you have osteoarthritis, your provider:

  • Will ask about your symptoms and medical history
  • Will do a physical exam
  • May use x-rays or other imaging tests to look at your joints
  • May order lab tests to make sure that a different problem isn't causing your symptoms

What are the treatments for osteoarthritis?

The goal of treating osteoarthritis is to ease your pain, help you move better, and stop it from getting worse.

Treatment usually begins with:

  • Exercises to improve strength, flexibility and balance
  • Weight loss, if needed, to improve pain, especially in your hips or knees
  • Braces or shoe inserts (orthotics) that a health care provider fits for you

You can buy some pain relievers and arthritis creams without a prescription. They can be helpful, but it's best to talk to your provider about using them. If they don't help enough, your provider may prescribe injections (shots) into the joint or prescription pain relievers.

Complementary therapies may help some people. Massage can increase blood flow and bring warmth to the area. Some research shows that acupuncture may help relieve osteoarthritis pain. Simple things like heat and ice can help, too.

If none of these treatments help enough, surgery may be an option. You and your provider can decide if it's right for you.

NIH: National Institute of Arthritis and Musculoskeletal and Skin Diseases


[Read More]

ICD-9 Footnotes

General Equivalence Map Definitions
The ICD-9 and ICD-10 GEMs are used to facilitate linking between the diagnosis codes in ICD-9-CM and the new ICD-10-CM code set. The GEMs are the raw material from which providers, health information vendors and payers can derive specific applied mappings to meet their needs.

  • Approximate Flag - The approximate flag is on, indicating that the relationship between the code in the source system and the code in the target system is an approximate equivalent.
  • No Map Flag - The no map flag indicates that a code in the source system is not linked to any code in the target system.
  • Combination Flag - The combination flag indicates that more than one code in the target system is required to satisfy the full equivalent meaning of a code in the source system.

Index of Diseases and Injuries Definitions

  • And - The word "and" should be interpreted to mean either "and" or "or" when it appears in a title.
  • Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.
  • Code first - Certain conditions have both an underlying etiology and multiple body system manifestations due to the underlying etiology. For such conditions, the ICD-10-CM has a coding convention that requires the underlying condition be sequenced first followed by the manifestation. Wherever such a combination exists, there is a "use additional code" note at the etiology code, and a "code first" note at the manifestation code. These instructional notes indicate the proper sequencing order of the codes, etiology followed by manifestation.
  • Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.
  • Type 2 Excludes Notes - A type 2 Excludes note represents "Not included here". An excludes2 note indicates that the condition excluded is not part of the condition represented by the code, but a patient may have both conditions at the same time. When an Excludes2 note appears under a code, it is acceptable to use both the code and the excluded code together, when appropriate.
  • Includes Notes - This note appears immediately under a three character code title to further define, or give examples of, the content of the category.
  • Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.
  • NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.
  • NOS "Not otherwise specified" - This abbreviation is the equivalent of unspecified.
  • See - The "see" instruction following a main term in the Alphabetic Index indicates that another term should be referenced. It is necessary to go to the main term referenced with the "see" note to locate the correct code.
  • See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.
  • 7th Characters - Certain ICD-10-CM categories have applicable 7th characters. The applicable 7th character is required for all codes within the category, or as the notes in the Tabular List instruct. The 7th character must always be the 7th character in the data field. If a code that requires a 7th character is not 6 characters, a placeholder X must be used to fill in the empty characters.
  • With - The word "with" should be interpreted to mean "associated with" or "due to" when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List. The word "with" in the Alphabetic Index is sequenced immediately following the main term, not in alphabetical order.