ICD-9 Code V14.0
Personal history of allergy to penicillin
Not Valid for Submission
V14.0 is a legacy non-billable code used to specify a medical diagnosis of personal history of allergy to penicillin. This code was replaced on September 30, 2015 by its ICD-10 equivalent.
| ICD-9: | V14.0 |
| Short Description: | Hx-penicillin allergy |
| Long Description: | Personal history of allergy to penicillin |
Convert V14.0 to ICD-10
The following crosswalk between ICD-9 to ICD-10 is based based on the General Equivalence Mappings (GEMS) information:
- Z88.0 - Allergy status to penicillin
Code Classification
-
Supplementary classification of factors influencing health status and contact with health services (E)
-
Persons with potential health hazards related to personal and family history (V10-V19)
- V14 Personal history of allergy to medicinal agents
-
Persons with potential health hazards related to personal and family history (V10-V19)
Information for Medical Professionals
Index to Diseases and Injuries
References found for the code V14.0 in the Index of Diseases and Injuries:
- History personal of
- allergy to V15.09
- antibiotic agent NEC
NEC "Not elsewhere classifiable"
This abbreviation in the index represents “other specified” when a specific code is not available for a condition the index directs the coder to the “other specified” code in the tabular. V14.1- penicillin V14.0
- penicillin V14.0
- antibiotic agent NEC
- allergy to V15.09
Information for Patients
Antibiotics
What are antibiotics?
Antibiotics are medicines that fight bacterial infections in people and animals. They work by killing the bacteria or by making it hard for the bacteria to grow and multiply.
Antibiotics can be taken in different ways:
- Orally (by mouth). This could be pills, capsules, or liquids.
- Topically. This might be a cream, spray, or ointment that you put on your skin. It could also be eye ointment, eye drops, or ear drops.
- Through an injection or intravenously (IV). This is usually for more serious infections.
What do antibiotics treat?
Antibiotics only treat certain bacterial infections, such as strep throat, urinary tract infections, and E. coli.
You may not need to take antibiotics for some bacterial infections. For example, you might not need them for many sinus infections or some ear infections. Taking antibiotics when they're not needed won't help you, and they can have side effects. Your health care provider can decide the best treatment for you when you're sick. Don't ask your provider to prescribe an antibiotic for you.
Do antibiotics treat viral infections?
Antibiotics do not work on viral infections. For example, you shouldn't take antibiotics for:
- Colds and runny noses, even if the mucus is thick, yellow, or green
- Most sore throats (except strep throat)
- Flu
- Most cases of bronchitis
What are the side effects of antibiotics?
The side effects of antibiotics range from minor to very severe. Some of the common side effects include:
- Rash
- Nausea
- Diarrhea
- Yeast infections
More serious side effects can include:
- C. diff infections, which cause diarrhea that can lead to severe colon damage and sometimes even death
- Severe and life-threatening allergic reactions
- Antibiotic resistance infections
Call your health care provider if you develop any side effects while taking your antibiotic.
Why is it important to take antibiotics only when they're needed?
You should only take antibiotics when they are needed because they can cause side effects and can contribute to antibiotic resistance. Antibiotic resistance happens when the bacteria change and become able to resist the effects of an antibiotic. This means that the bacteria continue to grow.
How do I use antibiotics correctly?
When you take antibiotics, it is important that you take them responsibly:
- Always follow the directions carefully. Finish your medicine even if you feel better. If you stop taking them too soon, some bacteria may survive and re-infect you.
- Don't save your antibiotics for later.
- Don't share your antibiotic with others.
- Don't take antibiotics prescribed for someone else. This may delay the best treatment for you, make you even sicker, or cause side effects.
Centers for Disease Control and Prevention
[Read More]
Drug Reactions
Most of the time, medicines make our lives better. They reduce aches and pains, fight infections, and control problems such as high blood pressure or diabetes. But medicines can also cause unwanted reactions, such as drug interactions, side effects, and allergies.
What is a drug interaction?
A drug interaction is a change in the way a drug acts in the body when taken with certain other drugs, foods, or supplements or when taken while you have certain medical conditions. Examples include:
- Two drugs, such as aspirin and blood thinners
- Drugs and food, such as statins and grapefruit
- Drugs and supplements, such as gingko and blood thinners
- Drugs and medical conditions, such as aspirin and peptic ulcers
Interactions could cause a drug to be more or less effective, cause side effects, or change the way one or both drugs work.
What are side effects?
Side effects are unwanted, usually unpleasant, effects caused by medicines. Most are mild, such as a stomachache, dry mouth, or drowsiness, and go away after you stop taking the medicine. Others can be more serious. Sometimes a drug can interact with a disease that you have and cause a side effect. For example, if you have a heart condition, certain decongestants can cause you to have a rapid heartbeat.
What are drug allergies?
Drug allergies are another type of reaction. They can range from mild to life-threatening. Skin reactions, such as hives and rashes, are the most common type. Anaphylaxis, a serious allergic reaction, is less common.
How can I stay safe when taking medicines?
When you start a new prescription or over-the-counter medicine, make sure you understand how to take it correctly. Know which other medicines, foods, and supplements you need to avoid. Always talk to your health care provider or pharmacist if you have questions about your medicines.
[Read More]
ICD-9 Footnotes
General Equivalence Map Definitions
The ICD-9 and ICD-10 GEMs are used to facilitate linking between the diagnosis codes in ICD-9-CM and the new ICD-10-CM code set. The GEMs are the raw material from which providers, health information vendors and payers can derive specific applied mappings to meet their needs.
- Approximate Flag - The approximate flag is on, indicating that the relationship between the code in the source system and the code in the target system is an approximate equivalent.
- No Map Flag - The no map flag indicates that a code in the source system is not linked to any code in the target system.
- Combination Flag - The combination flag indicates that more than one code in the target system is required to satisfy the full equivalent meaning of a code in the source system.
Index of Diseases and Injuries Definitions
- And - The word "and" should be interpreted to mean either "and" or "or" when it appears in a title.
- Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.
- Code first - Certain conditions have both an underlying etiology and multiple body system manifestations due to the underlying etiology. For such conditions, the ICD-10-CM has a coding convention that requires the underlying condition be sequenced first followed by the manifestation. Wherever such a combination exists, there is a "use additional code" note at the etiology code, and a "code first" note at the manifestation code. These instructional notes indicate the proper sequencing order of the codes, etiology followed by manifestation.
- Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.
- Type 2 Excludes Notes - A type 2 Excludes note represents "Not included here". An excludes2 note indicates that the condition excluded is not part of the condition represented by the code, but a patient may have both conditions at the same time. When an Excludes2 note appears under a code, it is acceptable to use both the code and the excluded code together, when appropriate.
- Includes Notes - This note appears immediately under a three character code title to further define, or give examples of, the content of the category.
- Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.
- NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.
- NOS "Not otherwise specified" - This abbreviation is the equivalent of unspecified.
- See - The "see" instruction following a main term in the Alphabetic Index indicates that another term should be referenced. It is necessary to go to the main term referenced with the "see" note to locate the correct code.
- See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.
- 7th Characters - Certain ICD-10-CM categories have applicable 7th characters. The applicable 7th character is required for all codes within the category, or as the notes in the Tabular List instruct. The 7th character must always be the 7th character in the data field. If a code that requires a 7th character is not 6 characters, a placeholder X must be used to fill in the empty characters.
- With - The word "with" should be interpreted to mean "associated with" or "due to" when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List. The word "with" in the Alphabetic Index is sequenced immediately following the main term, not in alphabetical order.