ICD-9 Code 041.10

Staphylococcus infection in conditions classified elsewhere and of unspecified site, staphylococcus, unspecified

Not Valid for Submission

041.10 is a legacy non-billable code used to specify a medical diagnosis of staphylococcus infection in conditions classified elsewhere and of unspecified site, staphylococcus, unspecified. This code was replaced on September 30, 2015 by its ICD-10 equivalent.

ICD-9: 041.10
Short Description:Staphylococcus unspcfied
Long Description:Staphylococcus infection in conditions classified elsewhere and of unspecified site, staphylococcus, unspecified

Convert 041.10 to ICD-10

The following crosswalk between ICD-9 to ICD-10 is based based on the General Equivalence Mappings (GEMS) information:

  • B95.8 - Unsp staphylococcus as the cause of diseases classd elswhr

Code Classification

  • Infectious and parasitic diseases (001–139)
    • Other bacterial diseases (030-041)
      • 041 Bacterial infection in conditions classified elsewhere and of unspecified site

Information for Medical Professionals

Synonyms

  • Acute staphylococcal pericarditis
  • Congenital staphylococcal pneumonia
  • Neonatal dacryocystitis due to staphylococcus
  • Neonatal dacryocystitis or conjunctivitis due to staphylococcus
  • Neonatal staphylococcal infection of skin
  • Sepsis due to Staphylococcus
  • Septic myocarditis - staphylococcal
  • Staphylococcal arthritis
  • Staphylococcal arthritis and polyarthritis
  • Staphylococcal blepharitis
  • Staphylococcal botryomycosis
  • Staphylococcal endocarditis
  • Staphylococcal eye infection
  • Staphylococcal folliculitis of scalp
  • Staphylococcal granuloma
  • Staphylococcal infectious disease
  • Staphylococcal intertrigo
  • Staphylococcal non-bullous impetigo
  • Staphylococcal omphalitis of newborn
  • Staphylococcal pleurisy
  • Staphylococcal scalded skin syndrome
  • Staphylococcal skin disorder
  • Staphylococcal tonsillitis

Index to Diseases and Injuries

References found for the code 041.10 in the Index of Diseases and Injuries:


Information for Patients


Staphylococcal Infections

What are Staphylococcal (staph) infections?

Staphylococcus (staph) is a group of bacteria. There are more than 30 types. A type called Staphylococcus aureus causes most infections.

Staph bacteria can cause many different types of infections, including:

  • Skin infections, which are the most common types of staph infections
  • Bacteremia, an infection of the bloodstream. This can lead to sepsis, a very serious immune response to infection.
  • Bone infections
  • Endocarditis, an infection of the inner lining of the heart chambers and valves
  • Food poisoning
  • Pneumonia
  • Toxic shock syndrome (TSS), a life-threatening condition caused by toxins from certain types of bacteria

What causes staph infections?

Some people carry staph bacteria on their skin or in their noses, but they do not get an infection. But if they get a cut or wound, the bacteria can enter the body and cause an infection.

Staph bacteria can spread from person to person. They can also spread on objects, such as towels, clothing, door handles, athletic equipment, and remotes. If you have staph and do not handle food properly when you are preparing it, you can also spread staph to others.

Who is at risk for staph infections?

Anyone can develop a staph infection, but certain people are at greater risk, including those who:

  • Have a chronic condition such as diabetes, cancer, vascular disease, eczema, and lung disease
  • Have a weakened immune system, such as from HIV/AIDS, medicines to prevent organ rejection, or chemotherapy
  • Had surgery
  • Use a catheter, breathing tube, or feeding tube
  • Are on dialysis
  • Inject illegal drugs
  • Do contact sports, since you may have skin-to-skin contact with others or share equipment

What are the symptoms of staph infections?

The symptoms of a staph infection depend on the type of infection:

  • Skin infections can look like pimples or boils. They may be red, swollen, and painful. Sometimes there is pus or other drainage. They can turn into impetigo, which turns into a crust on the skin, or cellulitis, a swollen, red area of skin that feels hot.
  • Bone infections can cause pain, swelling, warmth, and redness in the infected area. You may also have chills and a fever.
  • Endocarditis causes some flu-like symptoms: fever, chills, and fatigue. It also causes symptoms such as rapid heartbeat, shortness of breath, and fluid buildup in your arms or legs.
  • Food poisoning typically causes nausea and vomiting, diarrhea, and a fever. If you lose too many fluids, you may also become dehydrated.
  • Pneumonia symptoms include a high fever, chills, and cough that doesn't get better. You may also have chest pain and shortness of breath.
  • Toxic shock syndrome (TSS) causes high fever, sudden low blood pressure, vomiting, diarrhea, and confusion. You may have a sunburn-like rash somewhere on your body. TSS can lead to organ failure.

How are staph infections diagnosed?

Your health care provider will do a physical exam and ask about your symptoms. Often, providers can tell if you have a staph skin infection by looking at it. To check for other types of staph infections, providers may do a culture, with a skin scraping, tissue sample, stool sample, or throat or nasal swabs. There may be other tests, such as imaging tests, depending on the type of infection.

What are the treatments for staph infections?

Treatment for staph infections is antibiotics. Depending on the type of infection, you may get a cream, ointment, medicines (to swallow), or intravenous (IV). If you have an infected wound, your provider might drain it. Sometimes you may need surgery for bone infections.

Some staph infections, such as MRSA (methicillin-resistant Staphylococcus aureus), are resistant to many antibiotics. There are still certain antibiotics that can treat these infections.

Can staph infections be prevented?

Certain steps can help to prevent staph infections:

  • Use good hygiene, including washing your hands often
  • Don't share towels, sheets, or clothing with someone who has a staph infection
  • It's best not to share athletic equipment. If you do need to share, make sure that it properly cleaned and dried before you use it.
  • Practice food safety, including not preparing food for others when you have a staph infection
  • If you have a cut or wound, keep it covered

[Read More]

ICD-9 Footnotes

General Equivalence Map Definitions
The ICD-9 and ICD-10 GEMs are used to facilitate linking between the diagnosis codes in ICD-9-CM and the new ICD-10-CM code set. The GEMs are the raw material from which providers, health information vendors and payers can derive specific applied mappings to meet their needs.

  • Approximate Flag - The approximate flag is on, indicating that the relationship between the code in the source system and the code in the target system is an approximate equivalent.
  • No Map Flag - The no map flag indicates that a code in the source system is not linked to any code in the target system.
  • Combination Flag - The combination flag indicates that more than one code in the target system is required to satisfy the full equivalent meaning of a code in the source system.

Index of Diseases and Injuries Definitions

  • And - The word "and" should be interpreted to mean either "and" or "or" when it appears in a title.
  • Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.
  • Code first - Certain conditions have both an underlying etiology and multiple body system manifestations due to the underlying etiology. For such conditions, the ICD-10-CM has a coding convention that requires the underlying condition be sequenced first followed by the manifestation. Wherever such a combination exists, there is a "use additional code" note at the etiology code, and a "code first" note at the manifestation code. These instructional notes indicate the proper sequencing order of the codes, etiology followed by manifestation.
  • Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.
  • Type 2 Excludes Notes - A type 2 Excludes note represents "Not included here". An excludes2 note indicates that the condition excluded is not part of the condition represented by the code, but a patient may have both conditions at the same time. When an Excludes2 note appears under a code, it is acceptable to use both the code and the excluded code together, when appropriate.
  • Includes Notes - This note appears immediately under a three character code title to further define, or give examples of, the content of the category.
  • Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.
  • NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.
  • NOS "Not otherwise specified" - This abbreviation is the equivalent of unspecified.
  • See - The "see" instruction following a main term in the Alphabetic Index indicates that another term should be referenced. It is necessary to go to the main term referenced with the "see" note to locate the correct code.
  • See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.
  • 7th Characters - Certain ICD-10-CM categories have applicable 7th characters. The applicable 7th character is required for all codes within the category, or as the notes in the Tabular List instruct. The 7th character must always be the 7th character in the data field. If a code that requires a 7th character is not 6 characters, a placeholder X must be used to fill in the empty characters.
  • With - The word "with" should be interpreted to mean "associated with" or "due to" when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List. The word "with" in the Alphabetic Index is sequenced immediately following the main term, not in alphabetical order.