S82.2 - Fracture of shaft of tibia

Version 2023
ICD-10:S82.2
Short Description:Fracture of shaft of tibia
Long Description:Fracture of shaft of tibia
Status: Not Valid for Submission
Version:ICD-10-CM 2023
Code Classification:
  • Injury, poisoning and certain other consequences of external causes (S00–T98)
    • Injuries to the knee and lower leg (S80-S89)
      • Fracture of lower leg, including ankle (S82)

S82.2 is a non-specific and non-billable ICD-10 code code, consider using a code with a higher level of specificity for a diagnosis of fracture of shaft of tibia. The code is not specific and is NOT valid for the year 2023 for the submission of HIPAA-covered transactions. Category or Header define the heading of a category of codes that may be further subdivided by the use of 4th, 5th, 6th or 7th characters.

Coding Guidelines

The principles of multiple coding of injuries should be followed in coding fractures. Fractures of specified sites are coded individually by site nd the level of detail furnished by medical record content.

A fracture not indicated as open or closed should be coded to closed. A fracture not indicated whether displaced or not displaced should be coded to displaced.

Initial vs. Subsequent Encounter for Fractures

Traumatic fractures are coded using the appropriate 7th character for initial encounter (A, B, C) for each encounter where the patient is receiving active treatment for the fracture. The appropriate 7th character for initial encounter should also be assigned for a patient who delayed seeking treatment for the fracture or nonunion.

Fractures are coded using the appropriate 7th character for subsequent care for encounters after the patient has completed active treatment of the fracture and is receiving routine care for the fracture during the healing or recovery phase.

Care for complications of surgical treatment for fracture repairs during the healing or recovery phase should be coded with the appropriate complication codes.

Care of complications of fractures, such as malunion and nonunion, should be reported with the appropriate 7th character for subsequent care with nonunion (K, M, N,) or subsequent care with malunion (P, Q, R).

Malunion/nonunion: The appropriate 7th character for initial encounter should also be assigned for a patient who delayed seeking treatment for the fracture or nonunion.

The open fracture designations in the assignment of the 7th character for fractures of the forearm, femur and lower leg, including ankle are based on the Gustilo open fracture classification. When the Gustilo classification type is not specified for an open fracture, the 7th character for open fracture type I or II should be assigned (B, E, H, M, Q).

Specific Coding for Fracture of shaft of tibia

Non-specific codes like S82.2 require more digits to indicate the appropriate level of specificity. Consider using any of the following ICD-10 codes with a higher level of specificity when coding for fracture of shaft of tibia:

  • NON-BILLABLE CODE - S82.20 for Unspecified fracture of shaft of tibia
  • NON-BILLABLE CODE - S82.201 for Unspecified fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.201A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.201B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.201C for or IIIC
  • BILLABLE CODE - Use S82.201D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.201E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.201F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.201G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.201H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.201J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.201K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.201M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.201N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.201P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.201Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.201R for or IIIC with malunion
  • BILLABLE CODE - Use S82.201S for sequela
  • NON-BILLABLE CODE - S82.202 for Unspecified fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.202A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.202B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.202C for or IIIC
  • BILLABLE CODE - Use S82.202D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.202E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.202F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.202G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.202H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.202J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.202K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.202M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.202N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.202P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.202Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.202R for or IIIC with malunion
  • BILLABLE CODE - Use S82.202S for sequela
  • NON-BILLABLE CODE - S82.209 for Unspecified fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.209A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.209B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.209C for or IIIC
  • BILLABLE CODE - Use S82.209D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.209E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.209F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.209G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.209H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.209J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.209K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.209M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.209N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.209P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.209Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.209R for or IIIC with malunion
  • BILLABLE CODE - Use S82.209S for sequela
  • NON-BILLABLE CODE - S82.22 for Transverse fracture of shaft of tibia
  • NON-BILLABLE CODE - S82.221 for Displaced transverse fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.221A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.221B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.221C for or IIIC
  • BILLABLE CODE - Use S82.221D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.221E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.221F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.221G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.221H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.221J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.221K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.221M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.221N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.221P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.221Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.221R for or IIIC with malunion
  • BILLABLE CODE - Use S82.221S for sequela
  • NON-BILLABLE CODE - S82.222 for Displaced transverse fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.222A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.222B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.222C for or IIIC
  • BILLABLE CODE - Use S82.222D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.222E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.222F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.222G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.222H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.222J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.222K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.222M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.222N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.222P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.222Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.222R for or IIIC with malunion
  • BILLABLE CODE - Use S82.222S for sequela
  • NON-BILLABLE CODE - S82.223 for Displaced transverse fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.223A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.223B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.223C for or IIIC
  • BILLABLE CODE - Use S82.223D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.223E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.223F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.223G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.223H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.223J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.223K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.223M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.223N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.223P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.223Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.223R for or IIIC with malunion
  • BILLABLE CODE - Use S82.223S for sequela
  • NON-BILLABLE CODE - S82.224 for Nondisplaced transverse fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.224A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.224B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.224C for or IIIC
  • BILLABLE CODE - Use S82.224D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.224E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.224F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.224G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.224H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.224J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.224K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.224M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.224N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.224P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.224Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.224R for or IIIC with malunion
  • BILLABLE CODE - Use S82.224S for sequela
  • NON-BILLABLE CODE - S82.225 for Nondisplaced transverse fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.225A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.225B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.225C for or IIIC
  • BILLABLE CODE - Use S82.225D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.225E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.225F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.225G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.225H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.225J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.225K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.225M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.225N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.225P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.225Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.225R for or IIIC with malunion
  • BILLABLE CODE - Use S82.225S for sequela
  • NON-BILLABLE CODE - S82.226 for Nondisplaced transverse fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.226A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.226B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.226C for or IIIC
  • BILLABLE CODE - Use S82.226D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.226E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.226F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.226G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.226H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.226J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.226K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.226M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.226N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.226P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.226Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.226R for or IIIC with malunion
  • BILLABLE CODE - Use S82.226S for sequela
  • NON-BILLABLE CODE - S82.23 for Oblique fracture of shaft of tibia
  • NON-BILLABLE CODE - S82.231 for Displaced oblique fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.231A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.231B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.231C for or IIIC
  • BILLABLE CODE - Use S82.231D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.231E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.231F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.231G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.231H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.231J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.231K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.231M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.231N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.231P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.231Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.231R for or IIIC with malunion
  • BILLABLE CODE - Use S82.231S for sequela
  • NON-BILLABLE CODE - S82.232 for Displaced oblique fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.232A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.232B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.232C for or IIIC
  • BILLABLE CODE - Use S82.232D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.232E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.232F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.232G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.232H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.232J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.232K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.232M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.232N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.232P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.232Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.232R for or IIIC with malunion
  • BILLABLE CODE - Use S82.232S for sequela
  • NON-BILLABLE CODE - S82.233 for Displaced oblique fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.233A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.233B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.233C for or IIIC
  • BILLABLE CODE - Use S82.233D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.233E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.233F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.233G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.233H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.233J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.233K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.233M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.233N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.233P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.233Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.233R for or IIIC with malunion
  • BILLABLE CODE - Use S82.233S for sequela
  • NON-BILLABLE CODE - S82.234 for Nondisplaced oblique fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.234A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.234B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.234C for or IIIC
  • BILLABLE CODE - Use S82.234D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.234E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.234F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.234G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.234H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.234J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.234K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.234M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.234N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.234P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.234Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.234R for or IIIC with malunion
  • BILLABLE CODE - Use S82.234S for sequela
  • NON-BILLABLE CODE - S82.235 for Nondisplaced oblique fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.235A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.235B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.235C for or IIIC
  • BILLABLE CODE - Use S82.235D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.235E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.235F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.235G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.235H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.235J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.235K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.235M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.235N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.235P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.235Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.235R for or IIIC with malunion
  • BILLABLE CODE - Use S82.235S for sequela
  • NON-BILLABLE CODE - S82.236 for Nondisplaced oblique fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.236A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.236B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.236C for or IIIC
  • BILLABLE CODE - Use S82.236D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.236E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.236F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.236G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.236H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.236J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.236K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.236M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.236N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.236P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.236Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.236R for or IIIC with malunion
  • BILLABLE CODE - Use S82.236S for sequela
  • NON-BILLABLE CODE - S82.24 for Spiral fracture of shaft of tibia
  • NON-BILLABLE CODE - S82.241 for Displaced spiral fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.241A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.241B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.241C for or IIIC
  • BILLABLE CODE - Use S82.241D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.241E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.241F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.241G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.241H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.241J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.241K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.241M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.241N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.241P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.241Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.241R for or IIIC with malunion
  • BILLABLE CODE - Use S82.241S for sequela
  • NON-BILLABLE CODE - S82.242 for Displaced spiral fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.242A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.242B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.242C for or IIIC
  • BILLABLE CODE - Use S82.242D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.242E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.242F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.242G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.242H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.242J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.242K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.242M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.242N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.242P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.242Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.242R for or IIIC with malunion
  • BILLABLE CODE - Use S82.242S for sequela
  • NON-BILLABLE CODE - S82.243 for Displaced spiral fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.243A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.243B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.243C for or IIIC
  • BILLABLE CODE - Use S82.243D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.243E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.243F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.243G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.243H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.243J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.243K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.243M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.243N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.243P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.243Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.243R for or IIIC with malunion
  • BILLABLE CODE - Use S82.243S for sequela
  • NON-BILLABLE CODE - S82.244 for Nondisplaced spiral fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.244A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.244B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.244C for or IIIC
  • BILLABLE CODE - Use S82.244D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.244E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.244F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.244G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.244H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.244J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.244K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.244M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.244N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.244P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.244Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.244R for or IIIC with malunion
  • BILLABLE CODE - Use S82.244S for sequela
  • NON-BILLABLE CODE - S82.245 for Nondisplaced spiral fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.245A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.245B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.245C for or IIIC
  • BILLABLE CODE - Use S82.245D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.245E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.245F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.245G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.245H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.245J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.245K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.245M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.245N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.245P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.245Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.245R for or IIIC with malunion
  • BILLABLE CODE - Use S82.245S for sequela
  • NON-BILLABLE CODE - S82.246 for Nondisplaced spiral fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.246A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.246B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.246C for or IIIC
  • BILLABLE CODE - Use S82.246D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.246E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.246F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.246G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.246H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.246J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.246K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.246M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.246N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.246P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.246Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.246R for or IIIC with malunion
  • BILLABLE CODE - Use S82.246S for sequela
  • NON-BILLABLE CODE - S82.25 for Comminuted fracture of shaft of tibia
  • NON-BILLABLE CODE - S82.251 for Displaced comminuted fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.251A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.251B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.251C for or IIIC
  • BILLABLE CODE - Use S82.251D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.251E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.251F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.251G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.251H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.251J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.251K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.251M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.251N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.251P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.251Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.251R for or IIIC with malunion
  • BILLABLE CODE - Use S82.251S for sequela
  • NON-BILLABLE CODE - S82.252 for Displaced comminuted fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.252A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.252B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.252C for or IIIC
  • BILLABLE CODE - Use S82.252D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.252E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.252F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.252G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.252H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.252J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.252K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.252M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.252N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.252P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.252Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.252R for or IIIC with malunion
  • BILLABLE CODE - Use S82.252S for sequela
  • NON-BILLABLE CODE - S82.253 for Displaced comminuted fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.253A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.253B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.253C for or IIIC
  • BILLABLE CODE - Use S82.253D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.253E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.253F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.253G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.253H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.253J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.253K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.253M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.253N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.253P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.253Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.253R for or IIIC with malunion
  • BILLABLE CODE - Use S82.253S for sequela
  • NON-BILLABLE CODE - S82.254 for Nondisplaced comminuted fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.254A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.254B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.254C for or IIIC
  • BILLABLE CODE - Use S82.254D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.254E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.254F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.254G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.254H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.254J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.254K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.254M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.254N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.254P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.254Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.254R for or IIIC with malunion
  • BILLABLE CODE - Use S82.254S for sequela
  • NON-BILLABLE CODE - S82.255 for Nondisplaced comminuted fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.255A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.255B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.255C for or IIIC
  • BILLABLE CODE - Use S82.255D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.255E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.255F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.255G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.255H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.255J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.255K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.255M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.255N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.255P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.255Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.255R for or IIIC with malunion
  • BILLABLE CODE - Use S82.255S for sequela
  • NON-BILLABLE CODE - S82.256 for Nondisplaced comminuted fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.256A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.256B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.256C for or IIIC
  • BILLABLE CODE - Use S82.256D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.256E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.256F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.256G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.256H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.256J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.256K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.256M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.256N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.256P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.256Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.256R for or IIIC with malunion
  • BILLABLE CODE - Use S82.256S for sequela
  • NON-BILLABLE CODE - S82.26 for Segmental fracture of shaft of tibia
  • NON-BILLABLE CODE - S82.261 for Displaced segmental fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.261A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.261B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.261C for or IIIC
  • BILLABLE CODE - Use S82.261D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.261E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.261F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.261G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.261H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.261J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.261K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.261M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.261N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.261P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.261Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.261R for or IIIC with malunion
  • BILLABLE CODE - Use S82.261S for sequela
  • NON-BILLABLE CODE - S82.262 for Displaced segmental fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.262A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.262B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.262C for or IIIC
  • BILLABLE CODE - Use S82.262D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.262E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.262F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.262G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.262H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.262J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.262K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.262M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.262N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.262P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.262Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.262R for or IIIC with malunion
  • BILLABLE CODE - Use S82.262S for sequela
  • NON-BILLABLE CODE - S82.263 for Displaced segmental fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.263A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.263B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.263C for or IIIC
  • BILLABLE CODE - Use S82.263D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.263E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.263F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.263G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.263H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.263J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.263K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.263M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.263N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.263P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.263Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.263R for or IIIC with malunion
  • BILLABLE CODE - Use S82.263S for sequela
  • NON-BILLABLE CODE - S82.264 for Nondisplaced segmental fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.264A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.264B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.264C for or IIIC
  • BILLABLE CODE - Use S82.264D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.264E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.264F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.264G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.264H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.264J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.264K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.264M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.264N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.264P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.264Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.264R for or IIIC with malunion
  • BILLABLE CODE - Use S82.264S for sequela
  • NON-BILLABLE CODE - S82.265 for Nondisplaced segmental fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.265A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.265B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.265C for or IIIC
  • BILLABLE CODE - Use S82.265D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.265E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.265F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.265G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.265H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.265J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.265K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.265M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.265N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.265P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.265Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.265R for or IIIC with malunion
  • BILLABLE CODE - Use S82.265S for sequela
  • NON-BILLABLE CODE - S82.266 for Nondisplaced segmental fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.266A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.266B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.266C for or IIIC
  • BILLABLE CODE - Use S82.266D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.266E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.266F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.266G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.266H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.266J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.266K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.266M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.266N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.266P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.266Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.266R for or IIIC with malunion
  • BILLABLE CODE - Use S82.266S for sequela
  • NON-BILLABLE CODE - S82.29 for Other fracture of shaft of tibia
  • NON-BILLABLE CODE - S82.291 for Other fracture of shaft of right tibia
  • BILLABLE CODE - Use S82.291A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.291B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.291C for or IIIC
  • BILLABLE CODE - Use S82.291D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.291E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.291F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.291G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.291H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.291J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.291K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.291M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.291N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.291P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.291Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.291R for or IIIC with malunion
  • BILLABLE CODE - Use S82.291S for sequela
  • NON-BILLABLE CODE - S82.292 for Other fracture of shaft of left tibia
  • BILLABLE CODE - Use S82.292A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.292B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.292C for or IIIC
  • BILLABLE CODE - Use S82.292D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.292E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.292F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.292G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.292H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.292J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.292K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.292M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.292N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.292P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.292Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.292R for or IIIC with malunion
  • BILLABLE CODE - Use S82.292S for sequela
  • NON-BILLABLE CODE - S82.299 for Other fracture of shaft of unspecified tibia
  • BILLABLE CODE - Use S82.299A for initial encounter for closed fracture
  • BILLABLE CODE - Use S82.299B for initial encounter for open fracture type I or II
  • BILLABLE CODE - Use S82.299C for or IIIC
  • BILLABLE CODE - Use S82.299D for subsequent encounter for closed fracture with routine healing
  • BILLABLE CODE - Use S82.299E for subsequent encounter for open fracture type I or II with routine healing
  • BILLABLE CODE - Use S82.299F for or IIIC with routine healing
  • BILLABLE CODE - Use S82.299G for subsequent encounter for closed fracture with delayed healing
  • BILLABLE CODE - Use S82.299H for subsequent encounter for open fracture type I or II with delayed healing
  • BILLABLE CODE - Use S82.299J for or IIIC with delayed healing
  • BILLABLE CODE - Use S82.299K for subsequent encounter for closed fracture with nonunion
  • BILLABLE CODE - Use S82.299M for subsequent encounter for open fracture type I or II with nonunion
  • BILLABLE CODE - Use S82.299N for or IIIC with nonunion
  • BILLABLE CODE - Use S82.299P for subsequent encounter for closed fracture with malunion
  • BILLABLE CODE - Use S82.299Q for subsequent encounter for open fracture type I or II with malunion
  • BILLABLE CODE - Use S82.299R for or IIIC with malunion
  • BILLABLE CODE - Use S82.299S for sequela

Patient Education


Fractures

A fracture is a break, usually in a bone. If the broken bone punctures the skin, it is called an open or compound fracture. Fractures commonly happen because of car accidents, falls, or sports injuries. Other causes are low bone density and osteoporosis, which cause weakening of the bones. Overuse can cause stress fractures, which are very small cracks in the bone.

Symptoms of a fracture are:

You need to get medical care right away for any fracture. An x-ray can tell if your bone is broken. You may need to wear a cast or splint. Sometimes you need surgery to put in plates, pins or screws to keep the bone in place.


[Learn More in MedlinePlus]

Leg Injuries and Disorders

Your legs are made up of bones, blood vessels, muscles, and other connective tissue. They are important for motion and standing. Playing sports, running, falling, or having an accident can damage your legs. Common leg injuries include sprains and strains, joint dislocations, and fractures (broken bones).

These injuries can affect the entire leg, or just the foot, ankle, knee, or hip. Certain diseases also lead to leg problems. For example, knee osteoarthritis, common in older people, can cause pain and limited motion. Problems in your veins in your legs can lead to varicose veins or deep vein thrombosis.


[Learn More in MedlinePlus]

Code History