ICD-10 Code E34.52

Partial androgen insensitivity syndrome

Version 2019 Billable Code

Valid for Submission

E34.52 is a billable code used to specify a medical diagnosis of partial androgen insensitivity syndrome. The code is valid for the year 2020 for the submission of HIPAA-covered transactions.

ICD-10: E34.52
Short Description:Partial androgen insensitivity syndrome
Long Description:Partial androgen insensitivity syndrome

Code Classification

  • Endocrine, nutritional and metabolic diseases (E00–E90)
    • Disorders of other endocrine glands (E20-E35)
      • Other endocrine disorders (E34)

Code History

  • FY 2016 - New Code, effective from 10/1/2015 through 9/30/2016
    (first year ICD-10-CM implemented into the HIPAA mandated code set)
  • FY 2017 - No Change, effective from 10/1/2016 through 9/30/2017
  • FY 2018 - No Change, effective from 10/1/2017 through 9/30/2018
  • FY 2019 - No Change, effective from 10/1/2018 through 9/30/2019
  • FY 2020 - No Change, effective from 10/1/2019 through 9/30/2020

Information for Medical Professionals

Diagnostic Related Groups

The Diagnostic Related Groups (DRGs) are a patient classification scheme which provides a means of relating the type of patients a hospital treats. The DRGs divides all possible principal diagnoses into mutually exclusive principal diagnosis areas referred to as Major Diagnostic Categories (MDC). The diagnosis code E34.52 is grouped in the following groups for version MS-DRG V37.0 applicable from 10/01/2020 through 09/30/2020.

  • 643 - ENDOCRINE DISORDERS WITH MCC
  • 644 - ENDOCRINE DISORDERS WITH CC
  • 645 - ENDOCRINE DISORDERS WITHOUT CC/MCC

Convert E34.52 to ICD-9

The following crosswalk between ICD-10 to ICD-9 is based based on the General Equivalence Mappings (GEMS) information:

  • 259.52 - Part androgen insnsitvty

Synonyms

The following clinical terms are approximate synonyms or lay terms that might be used to identify the correct diagnosis code:

  • Androgen resistance syndrome
  • Androgen resistance syndrome
  • Androgen resistance syndrome
  • Disorder of androgen receptor
  • Disorder of androgen receptor
  • Incomplete testicular feminization syndrome
  • Male pseudohermaphroditism
  • Partial androgen insensitivity syndrome
  • Pseudohermaphroditism
  • Reifenstein syndrome
  • Testicular feminization

Index to Diseases and Injuries

The Index to Diseases and Injuries is an alphabetical listing of medical terms, with each term mapped to one or more ICD-10 code(s). The following references for the code E34.52 are found in the index:


Tabular List of Diseases and Injuries

The Tabular List of Diseases and Injuries is a list of ICD-10 codes, organized "head to toe" into chapters and sections with guidance for inclusions, exclusions, descriptions and more. The following references for the code E34.52 are found in the tabular index:

  • Inclusion Terms:
    • Partial androgen insensitivity
    • Reifenstein syndrome

Information for Patients


Endocrine Diseases

Your endocrine system includes eight major glands throughout your body. These glands make hormones. Hormones are chemical messengers. They travel through your bloodstream to tissues or organs. Hormones work slowly and affect body processes from head to toe. These include

  • Growth and development
  • Metabolism - digestion, elimination, breathing, blood circulation and maintaining body temperature
  • Sexual function
  • Reproduction
  • Mood

If your hormone levels are too high or too low, you may have a hormone disorder. Hormone diseases also occur if your body does not respond to hormones the way it is supposed to. Stress, infection and changes in your blood's fluid and electrolyte balance can also influence hormone levels.

In the United States, the most common endocrine disease is diabetes. There are many others. They are usually treated by controlling how much hormone your body makes. Hormone supplements can help if the problem is too little of a hormone.


[Learn More]

Androgen insensitivity syndrome Androgen insensitivity syndrome is a condition that affects sexual development before birth and during puberty. People with this condition are genetically male, with one X chromosome and one Y chromosome in each cell. Because their bodies are unable to respond to certain male sex hormones (called androgens), they may have mostly female external sex characteristics or signs of both male and female sexual development.Complete androgen insensitivity syndrome occurs when the body cannot use androgens at all. People with this form of the condition have the external sex characteristics of females, but do not have a uterus and therefore do not menstruate and are unable to conceive a child (infertile). They are typically raised as females and have a female gender identity. Affected individuals have male internal sex organs (testes) that are undescended, which means they are abnormally located in the pelvis or abdomen. Undescended testes have a small chance of becoming cancerous later in life if they are not surgically removed. People with complete androgen insensitivity syndrome also have sparse or absent hair in the pubic area and under the arms.The partial and mild forms of androgen insensitivity syndrome result when the body's tissues are partially sensitive to the effects of androgens. People with partial androgen insensitivity (also called Reifenstein syndrome) can have genitalia that look typically female, genitalia that have both male and female characteristics, or genitalia that look typically male. They may be raised as males or as females and may have a male or a female gender identity. People with mild androgen insensitivity are born with male sex characteristics, but they are often infertile and tend to experience breast enlargement at puberty.
[Learn More]

ICD-10 Footnotes

General Equivalence Map Definitions
The ICD-10 and ICD-9 GEMs are used to facilitate linking between the diagnosis codes in ICD-9-CM and the new ICD-10-CM code set. The GEMs are the raw material from which providers, health information vendors and payers can derive specific applied mappings to meet their needs.

  • Approximate Flag - The approximate flag is on, indicating that the relationship between the code in the source system and the code in the target system is an approximate equivalent.
  • No Map Flag - The no map flag indicates that a code in the source system is not linked to any code in the target system.
  • Combination Flag - The combination flag indicates that more than one code in the target system is required to satisfy the full equivalent meaning of a code in the source system.

Index of Diseases and Injuries Definitions

  • And - The word "and" should be interpreted to mean either "and" or "or" when it appears in a title.
  • Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.
  • Code first - Certain conditions have both an underlying etiology and multiple body system manifestations due to the underlying etiology. For such conditions, the ICD-10-CM has a coding convention that requires the underlying condition be sequenced first followed by the manifestation. Wherever such a combination exists, there is a "use additional code" note at the etiology code, and a "code first" note at the manifestation code. These instructional notes indicate the proper sequencing order of the codes, etiology followed by manifestation.
  • Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.
  • Type 2 Excludes Notes - A type 2 Excludes note represents "Not included here". An excludes2 note indicates that the condition excluded is not part of the condition represented by the code, but a patient may have both conditions at the same time. When an Excludes2 note appears under a code, it is acceptable to use both the code and the excluded code together, when appropriate.
  • Includes Notes - This note appears immediately under a three character code title to further define, or give examples of, the content of the category.
  • Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.
  • NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.
  • NOS "Not otherwise specified" - This abbreviation is the equivalent of unspecified.
  • See - The "see" instruction following a main term in the Alphabetic Index indicates that another term should be referenced. It is necessary to go to the main term referenced with the "see" note to locate the correct code.
  • See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.
  • 7th Characters - Certain ICD-10-CM categories have applicable 7th characters. The applicable 7th character is required for all codes within the category, or as the notes in the Tabular List instruct. The 7th character must always be the 7th character in the data field. If a code that requires a 7th character is not 6 characters, a placeholder X must be used to fill in the empty characters.
  • With - The word "with" should be interpreted to mean "associated with" or "due to" when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List. The word "with" in the Alphabetic Index is sequenced immediately following the main term, not in alphabetical order.