ICD-10 Diagnosis Code B95.62

Methicillin resis staph infct causing diseases classd elswhr

Diagnosis Code B95.62

ICD-10: B95.62
Short Description: Methicillin resis staph infct causing diseases classd elswhr
Long Description: Methicillin resistant Staphylococcus aureus infection as the cause of diseases classified elsewhere
This is the 2019 version of the ICD-10-CM diagnosis code B95.62

Valid for Submission
The code B95.62 is valid for submission for HIPAA-covered transactions.

Code Classification
  • Certain infectious and parasitic diseases (A00–B99)
    • Bacterial and viral infectious agents (B95-B97)
      • Strep as the cause of diseases classified elsewhere (B95)

Information for Medical Professionals


Code Edits
The following edits are applicable to this code:
Unacceptable principal diagnosis - There are selected codes that describe a circumstance which influences an individual’s health status but not a current illness or injury, or codes that are not specific manifestations but may be due to an underlying cause. These codes are considered unacceptable as a principal diagnosis.

Diagnostic Related Groups
The diagnosis code B95.62 is grouped in the following Diagnostic Related Group(s) (MS-DRG V35.0)

  • 867 - OTHER INFECTIOUS AND PARASITIC DISEASES DIAGNOSES WITH MCC
  • 868 - OTHER INFECTIOUS AND PARASITIC DISEASES DIAGNOSES WITH CC
  • 869 - OTHER INFECTIOUS AND PARASITIC DISEASES DIAGNOSES WITHOUT CC/MCC

Convert to ICD-9
  • 041.12 - MRSA elsewhere/NOS (Approximate Flag)

Synonyms
  • Bacteremia
  • Bacteremia caused by Gram-positive bacteria
  • Bacteremia due to Methicillin resistant Staphylococcus aureus
  • Bacteremia due to Staphylococcus aureus
  • Community-acquired methicillin-resistant Staphylococcus aureus infection
  • Gram-positive septic shock
  • Meningitis caused by methicillin resistant Staphylococcus aureus
  • Methicillin resistant Staphylococcus aureus infection
  • Methicillin resistant Staphylococcus aureus infection
  • Methicillin resistant Staphylococcus aureus infection
  • MRSA infection of postoperative wound
  • Multiple-resistant Staphylococcus aureus infection
  • Postoperative wound infection
  • Staphylococcal meningitis
  • Staphylococcal toxic shock syndrome
  • Staphylococcus aureus meningitis
  • Toxic shock syndrome
  • Toxic shock syndrome due to methicillin resistant Staphylococcus aureus infection

Index of Diseases and Injuries
References found for the code B95.62 in the Index of Diseases and Injuries:

  • Inclusion Terms:
    • Methicillin resistant staphylococcus aureus (MRSA) infection as the cause of diseases classified elsewhere

Information for Patients


Antibiotic Resistance

Antibiotics are medicines that fight bacterial infections. Used properly, they can save lives. But there is a growing problem of antibiotic resistance. It happens when bacteria change and become able to resist the effects of an antibiotic.

Using antibiotics can lead to resistance. Each time you take antibiotics, sensitive bacteria are killed. But resistant germs may be left to grow and multiply. They can spread to other people. They can also cause infections that certain antibiotics cannot cure. Methicillin-resistant Staphylococcus aureus (MRSA) is one example. It causes infections that are resistant to several common antibiotics.

To help prevent antibiotic resistance

  • Don't use antibiotics for viruses like colds or flu. Antibiotics don't work on viruses.
  • Don't pressure your doctor to give you an antibiotic.
  • When you take antibiotics, follow the directions carefully. Finish your medicine even if you feel better. If you stop treatment too soon, some bacteria may survive and re-infect you.
  • Don't save antibiotics for later or use someone else's prescription.

Centers for Disease Control and Prevention

  • Vancomycin resistant enterococci (Medical Encyclopedia)

[Read More]

MRSA

Also called: Methicillin-resistant Staphylococcus aureus

MRSA stands for methicillin-resistant Staphylococcus aureus. It causes a staph infection (pronounced "staff infection") that is resistant to several common antibiotics. There are two types of infection. Hospital-associated MRSA happens to people in health care settings. Community-associated MRSA happens to people who have close skin-to-skin contact with others, such as athletes involved in football and wrestling.

Infection control is key to stopping MRSA in hospitals. To prevent community-associated MRSA

  • Practice good hygiene
  • Keep cuts and scrapes clean and covered with a bandage until healed
  • Avoid contact with other people's wounds or bandages
  • Avoid sharing personal items, such as towels, washcloths, razors, or clothes
  • Wash soiled sheets, towels, and clothes in hot water with bleach and dry in a hot dryer

If a wound appears to be infected, see a health care provider. Treatments may include draining the infection and antibiotics.

NIH: National Institute of Allergy and Infectious Diseases

  • MRSA (Medical Encyclopedia)
  • Staph infections - hospital (Medical Encyclopedia)

[Read More]

ICD-10 Footnotes

General Equivalence Map Definitions
The ICD-10 and ICD-9 GEMs are used to facilitate linking between the diagnosis codes in ICD-9-CM and the new ICD-10-CM code set. The GEMs are the raw material from which providers, health information vendors and payers can derive specific applied mappings to meet their needs.

  • Approximate Flag - The approximate flag is on, indicating that the relationship between the code in the source system and the code in the target system is an approximate equivalent.
  • No Map Flag - The no map flag indicates that a code in the source system is not linked to any code in the target system.
  • Combination Flag - The combination flag indicates that more than one code in the target system is required to satisfy the full equivalent meaning of a code in the source system.

Index of Diseases and Injuries Definitions

  • And - The word "and" should be interpreted to mean either "and" or "or" when it appears in a title.
  • Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.
  • Code first - Certain conditions have both an underlying etiology and multiple body system manifestations due to the underlying etiology. For such conditions, the ICD-10-CM has a coding convention that requires the underlying condition be sequenced first followed by the manifestation. Wherever such a combination exists, there is a "use additional code" note at the etiology code, and a "code first" note at the manifestation code. These instructional notes indicate the proper sequencing order of the codes, etiology followed by manifestation.
  • Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.
  • Type 2 Excludes Notes - A type 2 Excludes note represents "Not included here". An excludes2 note indicates that the condition excluded is not part of the condition represented by the code, but a patient may have both conditions at the same time. When an Excludes2 note appears under a code, it is acceptable to use both the code and the excluded code together, when appropriate.
  • Includes Notes - This note appears immediately under a three character code title to further define, or give examples of, the content of the category.
  • Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.
  • NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.
  • NOS "Not otherwise specified" - This abbreviation is the equivalent of unspecified.
  • See - The "see" instruction following a main term in the Alphabetic Index indicates that another term should be referenced. It is necessary to go to the main term referenced with the "see" note to locate the correct code.
  • See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.
  • 7th Characters - Certain ICD-10-CM categories have applicable 7th characters. The applicable 7th character is required for all codes within the category, or as the notes in the Tabular List instruct. The 7th character must always be the 7th character in the data field. If a code that requires a 7th character is not 6 characters, a placeholder X must be used to fill in the empty characters.
  • With - The word "with" should be interpreted to mean "associated with" or "due to" when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List. The word "with" in the Alphabetic Index is sequenced immediately following the main term, not in alphabetical order.

Present on Admission
The Present on Admission (POA) indicator is used for diagnosis codes included in claims involving inpatient admissions to general acute care hospitals. POA indicators must be reported to CMS on each claim to facilitate the grouping of diagnoses codes into the proper Diagnostic Related Groups (DRG). CMS publishes a listing of specific diagnosis codes that are exempt from the POA reporting requirement.

Previous Code
B95.61
Next Code
B95.7