ICD-9 Code 493.82

Cough variant asthma

Not Valid for Submission

493.82 is a legacy non-billable code used to specify a medical diagnosis of cough variant asthma. This code was replaced on September 30, 2015 by its ICD-10 equivalent.

ICD-9: 493.82
Short Description:Cough variant asthma
Long Description:Cough variant asthma

Convert 493.82 to ICD-10

The following crosswalk between ICD-9 to ICD-10 is based based on the General Equivalence Mappings (GEMS) information:

Code Classification

  • Diseases of the respiratory system (460–519)
    • Chronic obstructive pulmonary disease and allied conditions (490-496)
      • 493 Asthma

Information for Medical Professionals

Index to Diseases and Injuries

References found for the code 493.82 in the Index of Diseases and Injuries:

    • Asthma asthmatic bronchial catarrh spasmodic 493.9
      • cough variant 493.82

Information for Patients


Asthma

What is asthma?

Asthma is a chronic (long-term) lung disease. It affects your airways, the tubes that carry air in and out of your lungs. When you have asthma, your airways can become inflamed and narrowed. This can cause wheezing, coughing, and tightness in your chest. When these symptoms get worse than usual, it is called an asthma attack or flare-up.

What causes asthma?

The exact cause of asthma is unknown. Genetics and your environment likely play a role in who gets asthma.

An asthma attack can happen when you are exposed to an asthma trigger. An asthma trigger is something that can set off or worsen your asthma symptoms. Different triggers can cause different types of asthma:

  • Allergic asthma is caused by allergens. Allergens are substances that cause an allergic reaction. They can include
    • Dust mites
    • Mold
    • Pets
    • Pollen from grass, trees, and weeds
    • Waste from pests such as cockroaches and mice
  • Nonallergic asthma is caused by triggers that are not allergens, such as
    • Breathing in cold air
    • Certain medicines
    • Household chemicals
    • Infections such as colds and the flu
    • Outdoor air pollution
    • Tobacco smoke
  • Occupational asthma is caused by breathing in chemicals or industrial dusts at work
  • Exercise-induced asthma happens during physical exercise, especially when the air is dry

Asthma triggers may be different for each person and can change over time.

Who is at risk for asthma?

Asthma affects people of all ages, but it often starts during childhood. Certain factors can raise your risk of having asthma:

  • Being exposed to secondhand smoke when your mother is pregnant with you or when you are a small child
  • Being exposed to certain substances at work, such as chemical irritants or industrial dusts
  • Genetics and family history. You are more likely to have asthma if one of your parents has it, especially if it's your mother.
  • Race or ethnicity. Black and African Americans and Puerto Ricans are at higher risk of asthma than people of other races or ethnicities.
  • Having other diseases or conditions such as obesity and allergies
  • Often having viral respiratory infections as a young child
  • Sex. In children, asthma is more common in boys. In teens and adults, it is more common in women.

What are the symptoms of asthma?

The symptoms of asthma include:

  • Chest tightness
  • Coughing, especially at night or early morning
  • Shortness of breath
  • Wheezing, which causes a whistling sound when you breathe out

These symptoms can range from mild to severe. You may have them every day or only once in a while.

When you are having an asthma attack, your symptoms get much worse. The attacks may come on gradually or suddenly. Sometimes they can be life-threatening. They are more common in people who have severe asthma. If you are having asthma attacks, you may need a change in your treatment.

How is asthma diagnosed?

Your health care provider may use many tools to diagnose asthma:

  • Physical exam
  • Medical history
  • Lung function tests, including spirometry, to test how well your lungs work
  • Tests to measure how your airways react to specific exposures. During this test, you inhale different concentrations of allergens or medicines that may tighten the muscles in your airways. Spirometry is done before and after the test.
  • Peak expiratory flow (PEF) tests to measure how fast you can blow air out using maximum effort
  • Fractional exhaled nitric oxide (FeNO) tests to measure levels of nitric oxide in your breath when you breathe out. High levels of nitric oxide may mean that your lungs are inflamed.
  • Allergy skin or blood tests, if you have a history of allergies. These tests check which allergens cause a reaction from your immune system.

What are the treatments for asthma?

If you have asthma, you will work with your health care provider to create a treatment plan. The plan will include ways to manage your asthma symptoms and prevent asthma attacks. It will include:

  • Strategies to avoid triggers. For example, if tobacco smoke is a trigger for you, you should not smoke or allow other people to smoke in your home or car.
  • Short-term relief medicines, also called quick-relief medicines. They help prevent symptoms or relieve symptoms during an asthma attack. They include an inhaler to carry with you all the time. It may also include other types of medicines which work quickly to help open your airways.
  • Control medicines. You take them every day to help prevent symptoms. They work by reducing airway inflammation and preventing narrowing of the airways.

If you have a severe attack and the short-term relief medicines do not work, you will need emergency care.

Your provider may adjust your treatment until asthma symptoms are controlled.

Sometimes asthma is severe and cannot be controlled with other treatments. If you are an adult with uncontrolled asthma, in some cases your provider might suggest bronchial thermoplasty. This is a procedure that uses heat to shrink the smooth muscle in the lungs. Shrinking the muscle reduces your airway's ability to tighten and allows you to breathe more easily. The procedure has some risks, so it's important to discuss them with your provider.


[Read More]

ICD-9 Footnotes

General Equivalence Map Definitions
The ICD-9 and ICD-10 GEMs are used to facilitate linking between the diagnosis codes in ICD-9-CM and the new ICD-10-CM code set. The GEMs are the raw material from which providers, health information vendors and payers can derive specific applied mappings to meet their needs.

  • Approximate Flag - The approximate flag is on, indicating that the relationship between the code in the source system and the code in the target system is an approximate equivalent.
  • No Map Flag - The no map flag indicates that a code in the source system is not linked to any code in the target system.
  • Combination Flag - The combination flag indicates that more than one code in the target system is required to satisfy the full equivalent meaning of a code in the source system.

Index of Diseases and Injuries Definitions

  • And - The word "and" should be interpreted to mean either "and" or "or" when it appears in a title.
  • Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.
  • Code first - Certain conditions have both an underlying etiology and multiple body system manifestations due to the underlying etiology. For such conditions, the ICD-10-CM has a coding convention that requires the underlying condition be sequenced first followed by the manifestation. Wherever such a combination exists, there is a "use additional code" note at the etiology code, and a "code first" note at the manifestation code. These instructional notes indicate the proper sequencing order of the codes, etiology followed by manifestation.
  • Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.
  • Type 2 Excludes Notes - A type 2 Excludes note represents "Not included here". An excludes2 note indicates that the condition excluded is not part of the condition represented by the code, but a patient may have both conditions at the same time. When an Excludes2 note appears under a code, it is acceptable to use both the code and the excluded code together, when appropriate.
  • Includes Notes - This note appears immediately under a three character code title to further define, or give examples of, the content of the category.
  • Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.
  • NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.
  • NOS "Not otherwise specified" - This abbreviation is the equivalent of unspecified.
  • See - The "see" instruction following a main term in the Alphabetic Index indicates that another term should be referenced. It is necessary to go to the main term referenced with the "see" note to locate the correct code.
  • See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.
  • 7th Characters - Certain ICD-10-CM categories have applicable 7th characters. The applicable 7th character is required for all codes within the category, or as the notes in the Tabular List instruct. The 7th character must always be the 7th character in the data field. If a code that requires a 7th character is not 6 characters, a placeholder X must be used to fill in the empty characters.
  • With - The word "with" should be interpreted to mean "associated with" or "due to" when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List. The word "with" in the Alphabetic Index is sequenced immediately following the main term, not in alphabetical order.