ICD-9 Code 283.11

Hemolytic-uremic syndrome

Not Valid for Submission

283.11 is a legacy non-billable code used to specify a medical diagnosis of hemolytic-uremic syndrome. This code was replaced on September 30, 2015 by its ICD-10 equivalent.

ICD-9: 283.11
Short Description:Hemolytic uremic synd
Long Description:Hemolytic-uremic syndrome

Convert 283.11 to ICD-10

The following crosswalk between ICD-9 to ICD-10 is based based on the General Equivalence Mappings (GEMS) information:

  • D59.3 - Hemolytic-uremic syndrome

Code Classification

  • Diseases of the blood and blood-forming organs (280–289)
    • Diseases of the blood and blood-forming organs (280-289)
      • 283 Acquired hemolytic anemias

Information for Medical Professionals

Index to Diseases and Injuries

References found for the code 283.11 in the Index of Diseases and Injuries:


Information for Patients


Anemia

If you have anemia, your blood does not carry enough oxygen to the rest of your body. The most common cause of anemia is not having enough iron. Your body needs iron to make hemoglobin. Hemoglobin is an iron-rich protein that gives the red color to blood. It carries oxygen from the lungs to the rest of the body.

Anemia has three main causes: blood loss, lack of red blood cell production, and high rates of red blood cell destruction.

Conditions that may lead to anemia include:

  • Heavy periods
  • Pregnancy
  • Ulcers
  • Colon polyps or colon cancer
  • Inherited disorders
  • A diet that does not have enough iron, folic acid or vitamin B12
  • Blood disorders such as sickle cell anemia and thalassemia, or cancer
  • Aplastic anemia, a condition that can be inherited or acquired
  • G6PD deficiency, a metabolic disorder

Anemia can make you feel tired, cold, dizzy, and irritable. You may be short of breath or have a headache.

Your doctor will diagnose anemia with a physical exam and blood tests. Treatment depends on the kind of anemia you have.

NIH: National Heart, Lung, and Blood Institute


[Read More]

E. Coli Infections

E. coli is the name of a type of bacteria that lives in your intestines. Most types of E. coli are harmless. However, some types can make you sick and cause diarrhea. One type causes travelers' diarrhea. The worst type of E. coli causes bloody diarrhea, and can sometimes cause kidney failure and even death. These problems are most likely to occur in children and in adults with weak immune systems.

You can get E. coli infections by eating foods containing the bacteria. Symptoms of infection include:

  • Nausea or vomiting
  • Severe abdominal cramps
  • Watery or very bloody diarrhea
  • Fatigue
  • Fever

To help avoid food poisoning and prevent infection, handle food safely. Cook meat well, wash fruits and vegetables before eating or cooking them, and avoid unpasteurized milk and juices. You can also get the infection by swallowing water in a swimming pool contaminated with human waste.

Most cases of E. coli infection get better without treatment in 5 to 10 days.


[Read More]

Urinary Tract Infections

The urinary system is the body's drainage system for removing wastes and extra water. It includes two kidneys, two ureters, a bladder, and a urethra. Urinary tract infections (UTIs) are the second most common type of infection in the body.

You may have a UTI if you notice:

  • Pain or burning when you urinate
  • Fever, tiredness, or shakiness
  • An urge to urinate often
  • Pressure in your lower belly
  • Urine that smells bad or looks cloudy or reddish
  • Pain in your back or side below the ribs

People of any age or sex can get UTIs. But about four times as many women get UTIs as men. You're also at higher risk if you have diabetes, need a tube to drain your bladder, or have a spinal cord injury.

If you think you have a UTI it is important to see your doctor. Your doctor can tell if you have a UTI with a urine test. Treatment is with antibiotics.

NIH: National Institute of Diabetes and Digestive and Kidney Diseases


[Read More]

ICD-9 Footnotes

General Equivalence Map Definitions
The ICD-9 and ICD-10 GEMs are used to facilitate linking between the diagnosis codes in ICD-9-CM and the new ICD-10-CM code set. The GEMs are the raw material from which providers, health information vendors and payers can derive specific applied mappings to meet their needs.

  • Approximate Flag - The approximate flag is on, indicating that the relationship between the code in the source system and the code in the target system is an approximate equivalent.
  • No Map Flag - The no map flag indicates that a code in the source system is not linked to any code in the target system.
  • Combination Flag - The combination flag indicates that more than one code in the target system is required to satisfy the full equivalent meaning of a code in the source system.

Index of Diseases and Injuries Definitions

  • And - The word "and" should be interpreted to mean either "and" or "or" when it appears in a title.
  • Code also note - A "code also" note instructs that two codes may be required to fully describe a condition, but this note does not provide sequencing direction.
  • Code first - Certain conditions have both an underlying etiology and multiple body system manifestations due to the underlying etiology. For such conditions, the ICD-10-CM has a coding convention that requires the underlying condition be sequenced first followed by the manifestation. Wherever such a combination exists, there is a "use additional code" note at the etiology code, and a "code first" note at the manifestation code. These instructional notes indicate the proper sequencing order of the codes, etiology followed by manifestation.
  • Type 1 Excludes Notes - A type 1 Excludes note is a pure excludes note. It means "NOT CODED HERE!" An Excludes1 note indicates that the code excluded should never be used at the same time as the code above the Excludes1 note. An Excludes1 is used when two conditions cannot occur together, such as a congenital form versus an acquired form of the same condition.
  • Type 2 Excludes Notes - A type 2 Excludes note represents "Not included here". An excludes2 note indicates that the condition excluded is not part of the condition represented by the code, but a patient may have both conditions at the same time. When an Excludes2 note appears under a code, it is acceptable to use both the code and the excluded code together, when appropriate.
  • Includes Notes - This note appears immediately under a three character code title to further define, or give examples of, the content of the category.
  • Inclusion terms - List of terms is included under some codes. These terms are the conditions for which that code is to be used. The terms may be synonyms of the code title, or, in the case of "other specified" codes, the terms are a list of the various conditions assigned to that code. The inclusion terms are not necessarily exhaustive. Additional terms found only in the Alphabetic Index may also be assigned to a code.
  • NEC "Not elsewhere classifiable" - This abbreviation in the Alphabetic Index represents "other specified". When a specific code is not available for a condition, the Alphabetic Index directs the coder to the "other specified” code in the Tabular List.
  • NOS "Not otherwise specified" - This abbreviation is the equivalent of unspecified.
  • See - The "see" instruction following a main term in the Alphabetic Index indicates that another term should be referenced. It is necessary to go to the main term referenced with the "see" note to locate the correct code.
  • See Also - A "see also" instruction following a main term in the Alphabetic Index instructs that there is another main term that may also be referenced that may provide additional Alphabetic Index entries that may be useful. It is not necessary to follow the "see also" note when the original main term provides the necessary code.
  • 7th Characters - Certain ICD-10-CM categories have applicable 7th characters. The applicable 7th character is required for all codes within the category, or as the notes in the Tabular List instruct. The 7th character must always be the 7th character in the data field. If a code that requires a 7th character is not 6 characters, a placeholder X must be used to fill in the empty characters.
  • With - The word "with" should be interpreted to mean "associated with" or "due to" when it appears in a code title, the Alphabetic Index, or an instructional note in the Tabular List. The word "with" in the Alphabetic Index is sequenced immediately following the main term, not in alphabetical order.